Jump to content
Robalo Boating Forum

Transom Enclosing/ Drainage

Recommended Posts

I have a 1975 R-236 Cuddy that  I converted to a set up like you are contemplating , with a full transom height.

Bait Box can be operated as  freshwater pick up, and drains thru side of hull or closed circuit re-circulate.

Bait Tank was fabricated with gel coated  fiberglass, then enclosed in fiberglass encapsulated plywood and outside coated with gel coat.  Tank has a separator in the middle so bait can be segregated.  Bottom 2 hatches, give you access to the drain plug and floor drain trough. Also in the lower part is a transom mounted onboard dual charger/maintainer.

Feel free to ask any questions you may have. Project was not that difficult to do.


"The Dr. Ann"  



PC010338 (1).JPG

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...