Jump to content
Robalo Boating Forum

boarding ladder

Recommended Posts

Can you make one these work with the existing platform:


Hopefully, Robalo did not have a special size made for their boats.

Link to post
Share on other sites

Using Google, the standard ladder looks like Garelick  GAR-19676.  I would need a GAR-19677.

Have to get down to the dock and measure the size of the current ladder.


Link to post
Share on other sites

Can you tell what the coring material is where the bolts come through or is it solid fiberglass? Were the nuts missing and only one was holding???

I would have thought they would have used larger fender washers to spread the load out somewhat.  The other thing that concerns me there needs to be enough thread on the bolt protruding through so the nut is fully engaged and at minimum, flush with the back side of the nut.  Looks like QC completely missed this one.

Link to post
Share on other sites

That is not acceptable.  It is bad enough the installer did not do his job, but for the inspection to sign off as completed makes me wonder if this was done on a Friday afternoon.  You might want to at least let your local dealer see the pictures.

Link to post
Share on other sites
  • 8 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...